VALLEY VIEW – Nighttime Bridge Demo – Full Freeway Closures **UPDATED

*UPDATED CLOSURE TIME*
Valley View Avenue Nighttime Bridge Demolition &
I-5 Full Freeway Closures

Beginning Wednesday, Feb. 1

Crews will be demolishing one half of the Valley View Ave. bridge at I-5 and removing footings and columns on the freeway. This work will require the full closure of the northbound and southbound I-5 freeway, between Artesia Boulevard and Carmenita Avenue. Access to I-5 from the westbound SR-91 and southbound I-605 will also be limited. Valley View Avenue over I-5 will remain open to traffic. Frontage roads adjacent to Valley View Avenue at I-5 may be closed while this work is underway; closure information regarding these streets will be updated on the on the google map at the bottom of the page.

Please note, this work will be loud and disruptive due to demolition noise, construction equipment and related construction activity. 

Please note the closure start time for the northbound I-5 full freeway closure has been revised to reflect 11 p.m. See below in red for revisions. All other closure times will remain the same.

Specific closure times and recommended detour routes are outlined below; additional information will be provided on the project google map at the bottom of the page.

  • Northbound I-5 will be closed:
    • from 11 p.m. Wednesday, Feb. 1 to 5 a.m. Thursday, Feb. 2 
    • from 11 p.m. Thursday, Feb. 2 to 5 a.m. Friday, Feb. 3
    • from 11 p.m. Monday, Feb. 6 to 5 a.m. on Tuesday, Feb. 7
    • from 11 p.m. Thursday, Feb. 9 to 5 a.m. Friday, Feb. 10
    • from 11 p.m. Monday, Feb. 13 to 5 a.m. Tuesday, Feb. 14

DETOUR (shown on map below in blue): Exit at Valley View Ave., right on Firestone Blvd., left on Trojan Way, left on Alondra Blvd., left on Freeway Dr. to access northbound I-5 on-ramp.

  • Southbound I-5 will be closed:
    • from midnight to 5 a.m. on Thursday, Feb. 2, 
    • from midnight to 5 a.m. on Friday, Feb. 3 
    • from midnight to 5 a.m. on Tuesday, Feb. 7
    • from midnight to 5 a.m. on Wednesday, Feb. 8

DETOUR (shown on map below in green): Exit at Carmenita Rd., right on Carmenita, left on Artesia Blvd. to access southbound I-5 on-ramp.

  • Westbound SR-91 connector to northbound I-5 closed: 
    • from 11 p.m. Wednesday, Feb. 1 to 5 a.m. Thursday, Feb. 2
    • from 11 p.m. Thursday, Feb. 2 to 5 a.m. Friday, Feb. 3
    • from 11 p.m. Monday, Feb. 6 to 5 a.m. Tuesday, Feb. 7
    • from 11 p.m. Wednesday, Feb. 8 to 5 a.m. Thursday, Feb. 9
    • from 11 p.m. Sunday, Feb. 12 to 5 a.m. Monday, Feb. 13

DETOUR: Motorists will be directed to continue on westbound SR-91, transition onto northbound I-605, then to northbound I-5.

 

  • Southbound I-605 connector to southbound I-5 closed:
    • from 10 p.m. Wednesday, Feb. 1 to 5 a.m. Thursday, Feb. 2
    • from 10 p.m. Thursday, Feb. 2 to 5 a.m. Friday, Feb. 3
    • from 10 p.m. Monday, Feb. 6 to 5 a.m. Tuesday, Feb. 7
    • from 10 p.m. Tuesday, Feb. 7 to 5 a.m. Wednesday, Feb. 8
    • from 10 p.m. Wednesday, Feb. 8 to 5 a.m. Thursday, Feb. 9

DETOUR: Motorists will be directed to continue on southbound I-605, transition onto eastbound SR-91, then to southbound I-5.

Any updates or changes to the closures outlined above will be noted on the project google map at the bottom of the page.

Crews have closed the southbound Valley View Avenue off-ramp and reduced lanes (one lane in each direction) on the Valley View Avenue bridge over I-5. The duration of the ramp closure and lane reduction will be approximately two years. Heavy traffic and delays in the area are expected. If possible use alternative routes (shown on the map below). Portable changeable message signs have been placed in the vicinity to notify the motoring public.

Please visit the project Google map for detailed detour information regarding these closures, or view below.

DISCLAIMER: Due to the dynamic nature of construction, please note that all dates and times are subject to change due to unforeseen operational factors or inclement weather.

Please be advised that pile driving work may be loud and disruptive due to equipment noise, vibration and pounding related to pile driving activity. Also 

be advised that construction work may be noisy due to construction equipment, truck back-up alarms, and other construction related noise.

Print Friendly, PDF & Email